Whether in the toilet or in a swimming pool, it sometimes happens that the YotaPhone is slipped into the water. However, it isn’t simply because a telephone has fallen into the water that it is inevitably dead. In truth, it is possible to redo an YotaPhone that has fallen into the water. To achieve this, it is needed to respect particular actions. People often have bad reflexes and this is what can damage the YotaPhone. We will first of all discover the steps to be taken after the YotaPhone has fallen into the water. We will discover in the second place the classical errors that a good number of people make.
Methods to follow if perhaps your YotaPhone fell into the water
In the event that you want to restore your YotaPhone in working order, we advise that you follow the steps below.
Don’t attempt to turn the YotaPhone back on after getting out the water
One thing to accomplish when the YotaPhone has fallen into the water is to shut off the telephone. In truth, if perhaps it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the YotaPhone is started and wet, you could produce a short circuit and therefore toast the telephone.
Remove detachable components
When the YotaPhone is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your YotaPhone
Employing a straw, you have got to suck up the water that is contained in your YotaPhone. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your YotaPhone, you will have the capacity to start drying it.
Dry the YotaPhone
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Avoid using procédures that cause the telephone to heat up or damage the telephone. When it is performed, we advise you to leave the YotaPhone in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the YotaPhone.
Reassemble the components and turn on the YotaPhone
When you have completed the previous steps, your YotaPhone should be dry. So now you can try to turn on the YotaPhone. If perhaps this does not work, we advise you to hold out a couple of days or to bring the YotaPhone to a repairshop.
What should not be done if perhaps the YotaPhone has fallen into the water
You will find several points not to accomplish when your YotaPhone has fallen into the water. The first of all is to try to turn the telephone back on just after. This can destroy the YotaPhone. Next, it is highly suggested not to use a heat source to dry the YotaPhone. Indeed, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. In fact, it could as well damage the YotaPhone.
