Whether in the wc or in a pool, it occasionally happens that the XIAOMI Redmi S2 is dropped into the water. Nevertheless, it isn’t because a telephone has fallen into the water that it’s inevitably dead. In truth, it is feasible to redo an XIAOMI Redmi S2 that has fallen into the water. To get this done, it is needed to respect particular steps. People often have bad reflexes and this is what can damage the XIAOMI Redmi S2. We will first of all see the techniques to be taken after the XIAOMI Redmi S2 has fallen into the water. We will see in the second place the classical mistakes that many people make.
Steps to follow in cases where your XIAOMI Redmi S2 fell into the water
In the event that you desire to restore your XIAOMI Redmi S2 in operating order, we highly recommend that you follow the steps below.
Don’t attempt to turn the XIAOMI Redmi S2 back on after getting out the water
The first thing to do when the XIAOMI Redmi S2 has fallen into the water is to switch off the telephone. In truth, in cases where it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the XIAOMI Redmi S2 is turned on and wet, you could create a short circuit and therefore toast the telephone.
Remove detachable components
Once the XIAOMI Redmi S2 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your XIAOMI Redmi S2
Utilizing a straw, you have got to suck up the water that is contained in your XIAOMI Redmi S2. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your XIAOMI Redmi S2, you will be able to start drying it.
Dry the XIAOMI Redmi S2
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using procédures that cause the telephone to heat up or damage the telephone. Once it is performed, we suggest you to leave the XIAOMI Redmi S2 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the XIAOMI Redmi S2.
Reassemble the components and turn on the XIAOMI Redmi S2
When you have completed the previous steps, your XIAOMI Redmi S2 should be dry. So now you can make an attempt to turn on the XIAOMI Redmi S2. If this doesn’t function, we suggest you to hang on a couple of days or to bring the XIAOMI Redmi S2 to a repairman.
What should not be done in cases where the XIAOMI Redmi S2 has fallen into the water
There are several points not to do when your XIAOMI Redmi S2 has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can demolish the XIAOMI Redmi S2. Next, it is highly advised not to use a heat source to dry the XIAOMI Redmi S2. In fact, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. In fact, it could also damage the XIAOMI Redmi S2.
