Whether in the wc or in a pool, it occasionally happens that the XIAOMI Redmi 9A is slipped in the water. On the other hand, it’s not because a phone has fallen in the water that it’s obviously dead. Indeed, it is feasible to redo an XIAOMI Redmi 9A that has fallen in the water. To achieve this, it is essential to respect certain steps. People typically have bad reflexes and this is what can deteriorate the XIAOMI Redmi 9A. We will 1st see the steps to be taken after the XIAOMI Redmi 9A has fallen into the water. We will see in the secondary place the common errors that most people make.
Steps to follow in the event that your XIAOMI Redmi 9A fell into the water
Whenever you need to restore your XIAOMI Redmi 9A in working order, we suggest that you follow the steps below.
Don’t try to turn the XIAOMI Redmi 9A back on after exiting the water
One thing to accomplish when the XIAOMI Redmi 9A has fallen into the water is to shut off the phone. Indeed, in the event that it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the XIAOMI Redmi 9A is switched on and wet, you could produce a short circuit and as a result toast the phone.
Remove detachable components
Once the XIAOMI Redmi 9A is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your XIAOMI Redmi 9A
Utilizing a straw, you have got to suck up the water that is contained in your XIAOMI Redmi 9A. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your XIAOMI Redmi 9A, you will have the ability to start drying it.
Dry the XIAOMI Redmi 9A
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the phone to heat up or damage the phone. Once it is performed, we suggest you to leave the XIAOMI Redmi 9A in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the XIAOMI Redmi 9A.
Reassemble the components and turn on the XIAOMI Redmi 9A
When you have completed the prior steps, your XIAOMI Redmi 9A should be dry. So now you can try to turn on the XIAOMI Redmi 9A. If perhaps this doesn’t work, we suggest you to hold out a few days or to bring the XIAOMI Redmi 9A to a repairshop.
What should not be done in the event that the XIAOMI Redmi 9A has fallen into the water
There are a number of stuff not to accomplish when ever your XIAOMI Redmi 9A has fallen into the water. The 1st is to try to turn the phone back on just after. This can destroy the XIAOMI Redmi 9A. Next, it is highly advised not to use a heat source to dry the XIAOMI Redmi 9A. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. In fact, it could also damage the XIAOMI Redmi 9A.
