Whether in the toilet or in a swimming pool, it occasionally happens that the Xiaomi Mi 10T Pro is dropped into the water. However, it’s not because a mobile has fallen into the water that it’s obviously dead. In truth, it is possible to redo an Xiaomi Mi 10T Pro that has fallen into the water. To accomplish this, it is required to respect certain steps. People typically have bad reflexes and this is what can damage the Xiaomi Mi 10T Pro. We will 1st discover the methods to be taken after the Xiaomi Mi 10T Pro has fallen into the water. We will discover in the secondary place the classical mistakes that a large number of people make.
Methods to follow if your Xiaomi Mi 10T Pro fell into the water
In the event that you need to recover your Xiaomi Mi 10T Pro in operating order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Xiaomi Mi 10T Pro back on after exiting the water
One thing to perform when the Xiaomi Mi 10T Pro has fallen into the water is to shut off the mobile. In truth, if it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Xiaomi Mi 10T Pro is started and wet, you may generate a short circuit and therefore toast the mobile.
Remove detachable components
Once the Xiaomi Mi 10T Pro is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be required to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Xiaomi Mi 10T Pro
Employing a straw, you will need to suck up the water that is contained in your Xiaomi Mi 10T Pro. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Xiaomi Mi 10T Pro, you will be able to start drying it.
Dry the Xiaomi Mi 10T Pro
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. Once it is finished, we advise you to leave the Xiaomi Mi 10T Pro in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Xiaomi Mi 10T Pro.
Reassemble the components and turn on the Xiaomi Mi 10T Pro
When you have completed the prior steps, your Xiaomi Mi 10T Pro should be dry. So now you can make an attempt to turn on the Xiaomi Mi 10T Pro. If perhaps this does not do the job, we advise you to hang on a couple of days or to bring the Xiaomi Mi 10T Pro to a repairman.
What should not be done if the Xiaomi Mi 10T Pro has fallen into the water
You will find several things not to perform when ever your Xiaomi Mi 10T Pro has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can demolish the Xiaomi Mi 10T Pro. Next, it is strongly recommended not to use a heat source to dry the Xiaomi Mi 10T Pro. Indeed, techniques which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. In fact, it could additionally damage the Xiaomi Mi 10T Pro.
