Whether in the toilet or in a swimming pool, it sometimes happens that the Wiko Y80 is slipped into the water. Nonetheless, it’s not simply because a cellphone has fallen into the water that it is unavoidably dead. Indeed, it is feasible to redo an Wiko Y80 that has fallen into the water. To do this, it is needed to respect particular actions. People generally have bad reflexes and this is what can degrade the Wiko Y80. We will first of all see the methods to be taken after the Wiko Y80 has fallen into the water. We will see in the secondary place the common errors that many people make.
Methods to follow if your Wiko Y80 fell into the water
In the event that you desire to recover your Wiko Y80 in operating order, we advise that you follow the steps listed below.
Do not attempt to turn the Wiko Y80 back on after getting out the water
The very first thing to perform when the Wiko Y80 has fallen into the water is to turn off the cellphone. Indeed, if it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Wiko Y80 is started and wet, you may make a short circuit and therefore toast the cellphone.
Remove detachable components
When the Wiko Y80 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to take out the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Wiko Y80
Utilizing a straw, you need to suck up the water that is contained in your Wiko Y80. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko Y80, you will be ready to start drying it.
Dry the Wiko Y80
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Avoid using procédures that cause the cellphone to heat up or damage the cellphone. When it is finished, we advise you to leave the Wiko Y80 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Wiko Y80.
Reassemble the components and turn on the Wiko Y80
When you have completed the previous steps, your Wiko Y80 should be dry. So now you can make an attempt to turn on the Wiko Y80. If perhaps this doesn’t do the job, we advise you to hold out some days or to bring the Wiko Y80 to a repairshop.
What should not be done if the Wiko Y80 has fallen into the water
There are several stuff not to perform when your Wiko Y80 has fallen into the water. The first of all is to make an attempt to turn the cellphone back on just after. This can demolish the Wiko Y80. Following, it is highly advised not to use a heat source to dry the Wiko Y80. Certainly, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could as well ruin the Wiko Y80.
