Whether in the wc or in a pool, it sometimes happens that the Wiko Y62 is slipped into the water. On the other hand, it’s not because a phone has fallen into the water that it is inevitably dead. Certainly, it is feasible to redo an Wiko Y62 that has fallen into the water. To do this, it is essential to respect specific steps. People generally have bad reflexes and this is what can deteriorate the Wiko Y62. We will first of all see the methods to be taken after the Wiko Y62 has fallen into the water. We will see in the secondary place the classical mistakes that a large number of people make.
Steps to follow if perhaps your Wiko Y62 fell into the water
In the event that you want to restore your Wiko Y62 in working order, we advise that you follow the steps listed below.
Don’t try to turn the Wiko Y62 back on after exiting the water
The first thing to do when the Wiko Y62 has fallen into the water is to shut off the phone. Certainly, if perhaps it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Wiko Y62 is switched on and wet, you might create a short circuit and as a result toast the phone.
Remove detachable components
Once the Wiko Y62 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko Y62
By using a straw, you will have to suck up the water that is contained in your Wiko Y62. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko Y62, you will be ready to start drying it.
Dry the Wiko Y62
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is done, we advise you to leave the Wiko Y62 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Wiko Y62.
Reassemble the components and turn on the Wiko Y62
When you have completed the prior steps, your Wiko Y62 should be dry. So now you can try to turn on the Wiko Y62. If this does not work, we advise you to wait a couple of days or to bring the Wiko Y62 to a repairman.
What should not be done if perhaps the Wiko Y62 has fallen into the water
You will find several stuff not to do when your Wiko Y62 has fallen into the water. The first of all is to try to turn the phone back on just after. This can demolish the Wiko Y62. Following, it is highly advised not to use a heat source to dry the Wiko Y62. In fact, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Certainly, it could additionally damage the Wiko Y62.