How to fix a water damaged on Wiko Power U30

Whether in the toilet or in a pool, it sometimes happens that the Wiko Power U30 is slipped in the water. Nevertheless, it isn’t because a phone has fallen in the water that it is unavoidably dead. In truth, it is possible to redo an Wiko Power U30 that has fallen in the water. To achieve this, it is required to respect specific steps. People often have bad reflexes and this is what can damage the Wiko Power U30. We will first discover the methods to be taken after the Wiko Power U30 has fallen into the water. We will discover in the second place the common errors that a large number of people make.water-damaged-wiko-power-u30

Methods to follow in cases where your Wiko Power U30 fell into the water

If you need to recover your Wiko Power U30 in operating order, we recommend that you follow the steps below.

Do not attempt to turn the Wiko Power U30 back on after getting out the water

One thing to accomplish when the Wiko Power U30 has fallen into the water is to switch off the phone. In truth, in cases where it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Wiko Power U30 is switched on and wet, you can produce a short circuit and consequently toast the phone.

Remove detachable components

Once the Wiko Power U30 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will probably be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and continue to the following step.

Aspire the water that is in your Wiko Power U30

Utilizing a straw, you have got to suck up the water that is contained in your Wiko Power U30. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko Power U30, you will have the ability to start drying it.

Dry the Wiko Power U30

The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is done, we advise you to leave the Wiko Power U30 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Wiko Power U30.

Reassemble the components and turn on the Wiko Power U30

When you have completed the previous steps, your Wiko Power U30 should be dry. So now you can try to turn on the Wiko Power U30. If perhaps this does not function, we advise you to wait a couple of days or to bring the Wiko Power U30 to a repairshop.

What should not be done in cases where the Wiko Power U30 has fallen into the water

You will find a number of stuff not to accomplish when your Wiko Power U30 has fallen into the water. The first is to try to turn the phone back on just after. This can demolish the Wiko Power U30. Next, it is strongly advised not to use a heat source to dry the Wiko Power U30. Indeed, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could additionally damage the Wiko Power U30.