Whether in the wc or in a pool, it occasionally occurs that the Wiko Power U20 is dropped into the water. Even so, it is not simply because a mobile phone has fallen into the water that it’s undoubtedly dead. Certainly, it is possible to redo an Wiko Power U20 that has fallen into the water. To achieve this, it is required to respect specific steps. People frequently have bad reflexes and this is what can deteriorate the Wiko Power U20. We will first discover the methods to be taken after the Wiko Power U20 has fallen into the water. We will discover in the secondary place the common errors that a good number of people make.
Methods to follow in cases where your Wiko Power U20 fell into the water
If you desire to recover your Wiko Power U20 in operating order, we highly recommend that you follow the steps below.
Do not try to turn the Wiko Power U20 back on after getting out the water
The first thing to accomplish when the Wiko Power U20 has fallen into the water is to turn off the mobile phone. Certainly, in cases where it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Wiko Power U20 is switched on and wet, you might create a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Wiko Power U20 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be required to remove the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Wiko Power U20
Utilizing a straw, you need to suck up the water that is contained in your Wiko Power U20. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko Power U20, you will be ready to start drying it.
Dry the Wiko Power U20
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. When it is performed, we suggest you to leave the Wiko Power U20 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Wiko Power U20.
Reassemble the components and turn on the Wiko Power U20
When you have completed the prior steps, your Wiko Power U20 should be dry. So now you can make an attempt to turn on the Wiko Power U20. In the event that this doesn’t perform, we suggest you to hold out a few days or to bring the Wiko Power U20 to a repairshop.
What should not be done in cases where the Wiko Power U20 has fallen into the water
There are several things not to accomplish when ever your Wiko Power U20 has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can kill the Wiko Power U20. Following, it is strongly recommended not to use a heat source to dry the Wiko Power U20. In fact, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally ruin the Wiko Power U20.
