Whether in the wc or in a pool, it occasionally occurs that the Wiko Power U10 is slipped in the water. Even so, it’s not simply because a mobile has fallen in the water that it is unavoidably dead. In fact, it is feasible to redo an Wiko Power U10 that has fallen in the water. To achieve this, it is important to respect specific actions. People generally have bad reflexes and this is what can degrade the Wiko Power U10. We will 1st see the methods to be taken after the Wiko Power U10 has fallen into the water. We will see in the 2nd place the common errors that most people make.
Steps to follow if perhaps your Wiko Power U10 fell into the water
In the event that you want to restore your Wiko Power U10 in working order, we suggest that you follow the steps below.
Do not try to turn the Wiko Power U10 back on after exiting the water
One thing to do when the Wiko Power U10 has fallen into the water is to switch off the mobile. In fact, if perhaps it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Wiko Power U10 is switched on and wet, you could make a short circuit and as a result toast the mobile.
Remove detachable components
Once the Wiko Power U10 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it’ll be important to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Wiko Power U10
By using a straw, you will have to suck up the water that is contained in your Wiko Power U10. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Power U10, you will have the capacity to start drying it.
Dry the Wiko Power U10
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. Once it is completed, we recommend you to leave the Wiko Power U10 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Wiko Power U10.
Reassemble the components and turn on the Wiko Power U10
When you have completed the prior steps, your Wiko Power U10 should be dry. So now you can make an attempt to turn on the Wiko Power U10. If perhaps this does not work, we recommend you to hold out some days or to bring the Wiko Power U10 to a repairshop.
What should not be done if perhaps the Wiko Power U10 has fallen into the water
You will find a number of things not to do when your Wiko Power U10 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can kill the Wiko Power U10. Next, it is strongly recommended not to use a heat source to dry the Wiko Power U10. Indeed, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. In fact, it could additionally damage the Wiko Power U10.
