Whether in the wc or in a swimming pool, it from time to time happens that the Wiko Jerry 3 is slipped in the water. However, it isn’t simply because a phone has fallen in the water that it is unavoidably dead. Certainly, it is possible to redo an Wiko Jerry 3 that has fallen in the water. To do this, it is required to respect certain steps. People often have bad reflexes and this is what can deteriorate the Wiko Jerry 3. We will 1st see the methods to be taken after the Wiko Jerry 3 has fallen into the water. We will see in the 2nd place the common errors that a large number of people make.
Methods to follow if your Wiko Jerry 3 fell into the water
Whenever you desire to recover your Wiko Jerry 3 in working order, we recommend that you follow the steps listed below.
Do not attempt to turn the Wiko Jerry 3 back on after getting out the water
The very first thing to perform when the Wiko Jerry 3 has fallen into the water is to turn off the phone. Certainly, if it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Wiko Jerry 3 is started and wet, you could create a short circuit and consequently toast the phone.
Remove detachable components
When the Wiko Jerry 3 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be required to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Wiko Jerry 3
Utilizing a straw, you need to suck up the water that is contained in your Wiko Jerry 3. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Wiko Jerry 3, you will have the capacity to start drying it.
Dry the Wiko Jerry 3
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using methods that cause the phone to heat up or damage the phone. When it is done, we recommend you to leave the Wiko Jerry 3 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Wiko Jerry 3.
Reassemble the components and turn on the Wiko Jerry 3
When you have completed the prior steps, your Wiko Jerry 3 should be dry. So now you can try to turn on the Wiko Jerry 3. If perhaps this doesn’t work, we recommend you to wait a couple of days or to bring the Wiko Jerry 3 to a repairman.
What should not be done if the Wiko Jerry 3 has fallen into the water
There are a number of things not to perform when ever your Wiko Jerry 3 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Wiko Jerry 3. Following, it is highly advised not to use a heat source to dry the Wiko Jerry 3. Certainly, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Indeed, it could likewise ruin the Wiko Jerry 3.
