How to fix a water damaged on uSUN 250

Whether in the wc or in a swimming pool, it sometimes happens that the uSUN 250 is slipped in the water. Nonetheless, it isn’t because a mobile has fallen in the water that it is obviously dead. Indeed, it is feasible to redo an uSUN 250 that has fallen in the water. To do this, it is important to respect specific steps. People generally have bad reflexes and this is what can degrade the uSUN 250. We will 1st see the methods to be taken after the uSUN 250 has fallen into the water. We will see in the second place the common mistakes that a good number of people make.water-damaged-uSUN-250

Steps to follow if your uSUN 250 fell into the water

Whenever you wish to recover your uSUN 250 in working order, we highly recommend that you follow the steps listed below.

Don’t try to turn the uSUN 250 back on after getting out the water

One thing to do when the uSUN 250 has fallen into the water is to turn off the mobile. Indeed, if it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the uSUN 250 is switched on and wet, you could produce a short circuit and as a result toast the mobile.

Remove detachable components

When the uSUN 250 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be important to take out the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these items to dry and proceed to the following step.

Aspire the water that is in your uSUN 250

Using a straw, you must suck up the water that is contained in your uSUN 250. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your uSUN 250, you will be able to start drying it.

Dry the uSUN 250

The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is finished, we advise you to leave the uSUN 250 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the uSUN 250.

Reassemble the components and turn on the uSUN 250

When you have completed the prior steps, your uSUN 250 should be dry. So now you can make an attempt to turn on the uSUN 250. If this does not work, we advise you to hold out some days or to bring the uSUN 250 to a repairshop.

What should not be done if the uSUN 250 has fallen into the water

You will find a number of points not to do when your uSUN 250 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can kill the uSUN 250. Next, it is strongly advised not to use a heat source to dry the uSUN 250. In fact, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. In fact, it could likewise damage the uSUN 250.