How to fix a water damaged on Umidigi Z2

Whether in the toilet or in a pool, it occasionally occurs that the Umidigi Z2 is slipped in the water. Nevertheless, it is not because a phone has fallen in the water that it’s inevitably dead. Certainly, it is feasible to redo an Umidigi Z2 that has fallen in the water. To get this done, it is needed to respect certain actions. People often have bad reflexes and this is what can damage the Umidigi Z2. We will first of all see the steps to be taken after the Umidigi Z2 has fallen into the water. We will see in the second place the classical errors that a large number of people make.water-damaged-umidigi-z2

Steps to follow if perhaps your Umidigi Z2 fell into the water

If perhaps you need to recover your Umidigi Z2 in operating order, we highly recommend that you follow the steps below.

Don’t attempt to turn the Umidigi Z2 back on after exiting the water

The first thing to do when the Umidigi Z2 has fallen into the water is to switch off the phone. Certainly, if perhaps it didn’t switch off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Umidigi Z2 is turned on and wet, you may produce a short circuit and consequently toast the phone.

Remove detachable components

Once the Umidigi Z2 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these items to dry and continue to the following step.

Aspire the water that is in your Umidigi Z2

Utilizing a straw, you will have to suck up the water that is contained in your Umidigi Z2. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Umidigi Z2, you will be able to start drying it.

Dry the Umidigi Z2

The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. Once it is completed, we suggest you to leave the Umidigi Z2 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Umidigi Z2.

Reassemble the components and turn on the Umidigi Z2

When you have completed the prior steps, your Umidigi Z2 should be dry. So now you can try to turn on the Umidigi Z2. In the event that this doesn’t do the job, we suggest you to hold out a few days or to bring the Umidigi Z2 to a repairshop.

What should not be done if perhaps the Umidigi Z2 has fallen into the water

You will find several things not to do when ever your Umidigi Z2 has fallen into the water. The first of all is to try to turn the phone back on just after. This can demolish the Umidigi Z2. Following, it is strongly advised not to use a heat source to dry the Umidigi Z2. In fact, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Indeed, it could as well ruin the Umidigi Z2.