Whether in the wc or in a pool, it from time to time occurs that the Tecno Spark Go is dropped into the water. Nevertheless, it’s not simply because a cellphone has fallen into the water that it is undoubtedly dead. Indeed, it is feasible to redo an Tecno Spark Go that has fallen into the water. To achieve this, it is required to respect particular steps. People frequently have bad reflexes and this is what can deteriorate the Tecno Spark Go. We will first of all see the steps to be taken after the Tecno Spark Go has fallen into the water. We will see in the 2nd place the classical mistakes that a large number of people make.
Steps to follow in the event that your Tecno Spark Go fell into the water
Whenever you wish to restore your Tecno Spark Go in working order, we recommend that you follow the steps listed below.
Do not try to turn the Tecno Spark Go back on after exiting the water
One thing to do when the Tecno Spark Go has fallen into the water is to switch off the cellphone. Indeed, in the event that it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Tecno Spark Go is switched on and wet, you may make a short circuit and consequently toast the cellphone.
Remove detachable components
Once the Tecno Spark Go is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be required to remove the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your Tecno Spark Go
Using a straw, you must suck up the water that is contained in your Tecno Spark Go. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Tecno Spark Go, you will be able to start drying it.
Dry the Tecno Spark Go
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the cellphone to heat up or damage the cellphone. Once it is finished, we advise you to leave the Tecno Spark Go in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Tecno Spark Go.
Reassemble the components and turn on the Tecno Spark Go
When you have completed the previous steps, your Tecno Spark Go should be dry. So now you can try to turn on the Tecno Spark Go. If this does not work, we advise you to hold out a few days or to bring the Tecno Spark Go to a repairshop.
What should not be done in the event that the Tecno Spark Go has fallen into the water
There are a number of points not to do when ever your Tecno Spark Go has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can kill the Tecno Spark Go. Next, it is highly recommended not to use a heat source to dry the Tecno Spark Go. Without a doubt, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. In fact, it could also ruin the Tecno Spark Go.
