How to fix a water damaged on Tecno Spark Go Plus

Whether in the wc or in a pool, it sometimes happens that the Tecno Spark Go Plus is slipped into the water. However, it is not simply because a telephone has fallen into the water that it’s inevitably dead. Indeed, it is possible to redo an Tecno Spark Go Plus that has fallen into the water. To achieve this, it is necessary to respect certain steps. People often have bad reflexes and this is what can deteriorate the Tecno Spark Go Plus. We will first of all see the steps to be taken after the Tecno Spark Go Plus has fallen into the water. We will see in the second place the common errors that a large number of people make.water-damaged-Tecno-Spark-Go-Plus

Steps to follow in cases where your Tecno Spark Go Plus fell into the water

If you wish to restore your Tecno Spark Go Plus in working order, we recommend that you follow the steps listed below.

Don’t try to turn the Tecno Spark Go Plus back on after getting out the water

One thing to perform when the Tecno Spark Go Plus has fallen into the water is to turn off the telephone. Indeed, in cases where it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Tecno Spark Go Plus is switched on and wet, you can create a short circuit and therefore toast the telephone.

Remove detachable components

Once the Tecno Spark Go Plus is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will probably be necessary to take out the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the next step.

Aspire the water that is in your Tecno Spark Go Plus

Utilizing a straw, you need to suck up the water that is contained in your Tecno Spark Go Plus. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Tecno Spark Go Plus, you will have the ability to start drying it.

Dry the Tecno Spark Go Plus

The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. Once it is completed, we suggest you to leave the Tecno Spark Go Plus in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Tecno Spark Go Plus.

Reassemble the components and turn on the Tecno Spark Go Plus

When you have completed the previous steps, your Tecno Spark Go Plus should be dry. So now you can make an attempt to turn on the Tecno Spark Go Plus. If this doesn’t work, we suggest you to hold out some days or to bring the Tecno Spark Go Plus to a repairman.

What should not be done in cases where the Tecno Spark Go Plus has fallen into the water

There are a number of things not to perform when ever your Tecno Spark Go Plus has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can demolish the Tecno Spark Go Plus. Next, it is strongly suggested not to use a heat source to dry the Tecno Spark Go Plus. Indeed, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally damage the Tecno Spark Go Plus.