How to fix a water damaged on Sharp Aquos Crystal

Whether in the wc or in a pool, it sometimes happens that the Sharp Aquos Crystal is slipped in the water. However, it isn’t because a telephone has fallen in the water that it’s undoubtedly dead. Certainly, it is feasible to redo an Sharp Aquos Crystal that has fallen in the water. To do this, it is important to respect certain steps. People often have bad reflexes and this is what can degrade the Sharp Aquos Crystal. We will first of all see the methods to be taken after the Sharp Aquos Crystal has fallen into the water. We will see in the second place the classical mistakes that many people make.water-damaged-Sharp-Aquos-Crystal

Methods to follow in cases where your Sharp Aquos Crystal fell into the water

Whenever you need to recover your Sharp Aquos Crystal in operating order, we recommend that you follow the steps listed below.

Do not attempt to turn the Sharp Aquos Crystal back on after getting out the water

The first thing to perform when the Sharp Aquos Crystal has fallen into the water is to shut off the telephone. Certainly, in cases where it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Sharp Aquos Crystal is turned on and wet, you can generate a short circuit and consequently toast the telephone.

Remove detachable components

Once the Sharp Aquos Crystal is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be important to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Sharp Aquos Crystal

Employing a straw, you have got to suck up the water that is contained in your Sharp Aquos Crystal. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Sharp Aquos Crystal, you will have the ability to start drying it.

Dry the Sharp Aquos Crystal

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. Once it is performed, we advise you to leave the Sharp Aquos Crystal in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Sharp Aquos Crystal.

Reassemble the components and turn on the Sharp Aquos Crystal

When you have completed the prior steps, your Sharp Aquos Crystal should be dry. So now you can try to turn on the Sharp Aquos Crystal. If perhaps this does not work, we advise you to wait a few days or to bring the Sharp Aquos Crystal to a repairman.

What should not be done in cases where the Sharp Aquos Crystal has fallen into the water

You will find a number of stuff not to perform when ever your Sharp Aquos Crystal has fallen into the water. The first of all is to try to turn the telephone back on just after. This can destroy the Sharp Aquos Crystal. Following, it is strongly advised not to use a heat source to dry the Sharp Aquos Crystal. Without a doubt, solutions which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could additionally damage the Sharp Aquos Crystal.