Whether in the wc or in a pool, it occasionally happens that the Samsung Galaxy A10e is dropped into the water. Nevertheless, it isn’t because a mobile phone has fallen into the water that it is obviously dead. Certainly, it is possible to redo an Samsung Galaxy A10e that has fallen into the water. To do this, it is important to respect specific steps. People typically have bad reflexes and this is what can deteriorate the Samsung Galaxy A10e. We will first of all see the techniques to be taken after the Samsung Galaxy A10e has fallen into the water. We will see in the 2nd place the classical errors that a good number of people make.
Steps to follow in the event that your Samsung Galaxy A10e fell into the water
If perhaps you want to restore your Samsung Galaxy A10e in working order, we recommend that you follow the steps below.
Do not attempt to turn the Samsung Galaxy A10e back on after exiting the water
The first thing to do when the Samsung Galaxy A10e has fallen into the water is to turn off the mobile phone. Certainly, in the event that it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Samsung Galaxy A10e is started and wet, you may make a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Samsung Galaxy A10e is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Samsung Galaxy A10e
Utilizing a straw, you need to suck up the water that is contained in your Samsung Galaxy A10e. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Samsung Galaxy A10e, you will be ready to start drying it.
Dry the Samsung Galaxy A10e
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using procédures that cause the mobile phone to heat up or damage the mobile phone. Once it is done, we recommend you to leave the Samsung Galaxy A10e in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Samsung Galaxy A10e.
Reassemble the components and turn on the Samsung Galaxy A10e
When you have completed the prior steps, your Samsung Galaxy A10e should be dry. So now you can try to turn on the Samsung Galaxy A10e. In the event that this doesn’t function, we recommend you to wait a couple of days or to bring the Samsung Galaxy A10e to a repairman.
What should not be done in the event that the Samsung Galaxy A10e has fallen into the water
There are several stuff not to do when your Samsung Galaxy A10e has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can demolish the Samsung Galaxy A10e. Following, it is strongly recommended not to use a heat source to dry the Samsung Galaxy A10e. Without a doubt, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile phone, do not shake it. Certainly, it could as well damage the Samsung Galaxy A10e.
