How to fix a water damaged on ROG Phone

Whether in the wc or in a pool, it sometimes happens that the ROG Phone is dropped into the water. Nevertheless, it isn’t simply because a cellphone has fallen into the water that it is inevitably dead. In fact, it is possible to redo an ROG Phone that has fallen into the water. To get this done, it is needed to respect certain steps. People frequently have bad reflexes and this is what can deteriorate the ROG Phone. We will first see the techniques to be taken after the ROG Phone has fallen into the water. We will see in the second place the common errors that a large number of people make.water-damaged-rog-phone

Methods to follow if your ROG Phone fell into the water

In the event that you desire to recover your ROG Phone in working order, we highly recommend that you follow the steps listed below.

Don’t attempt to turn the ROG Phone back on after exiting the water

One thing to do when the ROG Phone has fallen into the water is to switch off the cellphone. In fact, if it did not switch off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the ROG Phone is switched on and wet, you can create a short circuit and therefore toast the cellphone.

Remove detachable components

Once the ROG Phone is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it’ll be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the following step.

Aspire the water that is in your ROG Phone

Employing a straw, you will have to suck up the water that is contained in your ROG Phone. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your ROG Phone, you will be ready to start drying it.

Dry the ROG Phone

The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using techniques that cause the cellphone to heat up or damage the cellphone. Once it is done, we suggest you to leave the ROG Phone in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the ROG Phone.

Reassemble the components and turn on the ROG Phone

When you have completed the previous steps, your ROG Phone should be dry. So now you can try to turn on the ROG Phone. If this does not perform, we suggest you to wait some days or to bring the ROG Phone to a repairman.

What should not be done if the ROG Phone has fallen into the water

There are several points not to do when your ROG Phone has fallen into the water. The first is to try to turn the cellphone back on just after. This can destroy the ROG Phone. Next, it is strongly recommended not to use a heat source to dry the ROG Phone. Without a doubt, techniques such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could also ruin the ROG Phone.