Whether in the wc or in a pool, it occasionally occurs that the Redmi 7A is dropped in the water. Nonetheless, it isn’t simply because a phone has fallen in the water that it’s inevitably dead. In fact, it is possible to redo an Redmi 7A that has fallen in the water. To achieve this, it is essential to respect certain steps. People often have bad reflexes and this is what can deteriorate the Redmi 7A. We will 1st see the steps to be taken after the Redmi 7A has fallen into the water. We will see in the 2nd place the common errors that the majority of people make.
Steps to follow in the event that your Redmi 7A fell into the water
If perhaps you want to recover your Redmi 7A in operating order, we highly recommend that you follow the steps listed below.
Do not try to turn the Redmi 7A back on after exiting the water
One thing to do when the Redmi 7A has fallen into the water is to shut off the phone. In fact, in the event that it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Redmi 7A is started and wet, you may generate a short circuit and as a result toast the phone.
Remove detachable components
Once the Redmi 7A is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Redmi 7A
Utilizing a straw, you must suck up the water that is contained in your Redmi 7A. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Redmi 7A, you will be able to start drying it.
Dry the Redmi 7A
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is finished, we recommend you to leave the Redmi 7A in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Redmi 7A.
Reassemble the components and turn on the Redmi 7A
When you have completed the previous steps, your Redmi 7A should be dry. So now you can try to turn on the Redmi 7A. In the event that this doesn’t work, we recommend you to hold out a few days or to bring the Redmi 7A to a repairshop.
What should not be done in the event that the Redmi 7A has fallen into the water
There are several stuff not to do when ever your Redmi 7A has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the Redmi 7A. Next, it is highly recommended not to use a heat source to dry the Redmi 7A. Without a doubt, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Certainly, it could additionally damage the Redmi 7A.
