Whether in the toilet or in a swimming pool, it sometimes happens that the Razer Phone 2 is slipped into the water. Nevertheless, it’s not because a phone has fallen into the water that it is inevitably dead. In fact, it is feasible to redo an Razer Phone 2 that has fallen into the water. To get this done, it is required to respect certain actions. People typically have bad reflexes and this is what can degrade the Razer Phone 2. We will 1st discover the techniques to be taken after the Razer Phone 2 has fallen into the water. We will discover in the second place the common errors that a good number of people make.
Steps to follow if your Razer Phone 2 fell into the water
Whenever you wish to recover your Razer Phone 2 in operating order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Razer Phone 2 back on after getting out the water
One thing to perform when the Razer Phone 2 has fallen into the water is to turn off the phone. In fact, if it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Razer Phone 2 is started and wet, you can make a short circuit and consequently toast the phone.
Remove detachable components
Once the Razer Phone 2 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be required to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Razer Phone 2
Utilizing a straw, you will need to suck up the water that is contained in your Razer Phone 2. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Razer Phone 2, you will have the capacity to start drying it.
Dry the Razer Phone 2
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. Once it is finished, we suggest you to leave the Razer Phone 2 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Razer Phone 2.
Reassemble the components and turn on the Razer Phone 2
When you have completed the previous steps, your Razer Phone 2 should be dry. So now you can make an attempt to turn on the Razer Phone 2. If perhaps this doesn’t perform, we suggest you to hang on some days or to bring the Razer Phone 2 to a repairshop.
What should not be done if the Razer Phone 2 has fallen into the water
There are a number of points not to perform when ever your Razer Phone 2 has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can demolish the Razer Phone 2. Following, it is highly suggested not to use a heat source to dry the Razer Phone 2. Certainly, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could additionally damage the Razer Phone 2.
