Whether in the toilet or in a swimming pool, it sometimes occurs that the Polaroid Ruby Pro V463 is dropped into the water. On the other hand, it is not simply because a cellphone has fallen into the water that it is unavoidably dead. Indeed, it is feasible to redo an Polaroid Ruby Pro V463 that has fallen into the water. To do this, it is required to respect particular actions. People frequently have bad reflexes and this is what can damage the Polaroid Ruby Pro V463. We will 1st see the steps to be taken after the Polaroid Ruby Pro V463 has fallen into the water. We will see in the 2nd place the common errors that a large number of people make.
Steps to follow in cases where your Polaroid Ruby Pro V463 fell into the water
If perhaps you need to recover your Polaroid Ruby Pro V463 in working order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Polaroid Ruby Pro V463 back on after exiting the water
The very first thing to accomplish when the Polaroid Ruby Pro V463 has fallen into the water is to turn off the cellphone. Indeed, in cases where it didn’t turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Polaroid Ruby Pro V463 is turned on and wet, you might generate a short circuit and as a result toast the cellphone.
Remove detachable components
When the Polaroid Ruby Pro V463 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be required to take away the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Polaroid Ruby Pro V463
By using a straw, you have got to suck up the water that is contained in your Polaroid Ruby Pro V463. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Polaroid Ruby Pro V463, you will have the ability to start drying it.
Dry the Polaroid Ruby Pro V463
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using solutions that cause the cellphone to heat up or damage the cellphone. When it is completed, we advise you to leave the Polaroid Ruby Pro V463 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Polaroid Ruby Pro V463.
Reassemble the components and turn on the Polaroid Ruby Pro V463
When you have completed the prior steps, your Polaroid Ruby Pro V463 should be dry. So now you can make an attempt to turn on the Polaroid Ruby Pro V463. If this does not function, we advise you to hang on a couple of days or to bring the Polaroid Ruby Pro V463 to a repairshop.
What should not be done in cases where the Polaroid Ruby Pro V463 has fallen into the water
There are several points not to accomplish when ever your Polaroid Ruby Pro V463 has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can kill the Polaroid Ruby Pro V463. Next, it is strongly suggested not to use a heat source to dry the Polaroid Ruby Pro V463. In fact, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could likewise damage the Polaroid Ruby Pro V463.
