Whether in the toilet or in a pool, it from time to time happens that the OPPO Reno6 is dropped in the water. Nevertheless, it’s not because a phone has fallen in the water that it is inevitably dead. In fact, it is possible to redo an OPPO Reno6 that has fallen in the water. To do this, it is required to respect particular steps. People generally have bad reflexes and this is what can damage the OPPO Reno6. We will first discover the methods to be taken after the OPPO Reno6 has fallen into the water. We will discover in the 2nd place the common errors that a good number of people make.
Methods to follow in the event that your OPPO Reno6 fell into the water
If you wish to recover your OPPO Reno6 in working order, we advise that you follow the steps listed below.
Don’t try to turn the OPPO Reno6 back on after exiting the water
The very first thing to accomplish when the OPPO Reno6 has fallen into the water is to turn off the phone. In fact, in the event that it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the OPPO Reno6 is switched on and wet, you may produce a short circuit and therefore toast the phone.
Remove detachable components
When the OPPO Reno6 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your OPPO Reno6
By using a straw, you will need to suck up the water that is contained in your OPPO Reno6. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your OPPO Reno6, you will have the capacity to start drying it.
Dry the OPPO Reno6
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using techniques that cause the phone to heat up or damage the phone. When it is done, we suggest you to leave the OPPO Reno6 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the OPPO Reno6.
Reassemble the components and turn on the OPPO Reno6
When you have completed the previous steps, your OPPO Reno6 should be dry. So now you can try to turn on the OPPO Reno6. If perhaps this does not do the job, we suggest you to wait a couple of days or to bring the OPPO Reno6 to a repairshop.
What should not be done in the event that the OPPO Reno6 has fallen into the water
There are several stuff not to accomplish when ever your OPPO Reno6 has fallen into the water. The first is to try to turn the phone back on just after. This can demolish the OPPO Reno6. Next, it is strongly recommended not to use a heat source to dry the OPPO Reno6. In fact, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could likewise ruin the OPPO Reno6.
