Whether in the toilet or in a pool, it sometimes happens that the Motorola Razr is dropped in the water. Nevertheless, it’s not simply because a phone has fallen in the water that it is undoubtedly dead. Certainly, it is feasible to redo an Motorola Razr that has fallen in the water. To do this, it is important to respect specific actions. People typically have bad reflexes and this is what can damage the Motorola Razr. We will first of all see the techniques to be taken after the Motorola Razr has fallen into the water. We will see in the 2nd place the common mistakes that many people make.
Methods to follow if perhaps your Motorola Razr fell into the water
Whenever you want to recover your Motorola Razr in working order, we suggest that you follow the steps below.
Don’t attempt to turn the Motorola Razr back on after exiting the water
The very first thing to accomplish when the Motorola Razr has fallen into the water is to switch off the phone. Certainly, if perhaps it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Motorola Razr is switched on and wet, you could generate a short circuit and therefore toast the phone.
Remove detachable components
When the Motorola Razr is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be important to take out the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and continue to the following step.
Aspire the water that is in your Motorola Razr
Utilizing a straw, you must suck up the water that is contained in your Motorola Razr. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Motorola Razr, you will have the capacity to start drying it.
Dry the Motorola Razr
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. When it is completed, we recommend you to leave the Motorola Razr in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Motorola Razr.
Reassemble the components and turn on the Motorola Razr
When you have completed the previous steps, your Motorola Razr should be dry. So now you can make an attempt to turn on the Motorola Razr. If perhaps this doesn’t function, we recommend you to wait a few days or to bring the Motorola Razr to a repairman.
What should not be done if perhaps the Motorola Razr has fallen into the water
You will find a number of stuff not to accomplish when ever your Motorola Razr has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can kill the Motorola Razr. Next, it is strongly recommended not to use a heat source to dry the Motorola Razr. Indeed, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Motorola Razr.
