How to fix a water damaged on Motorola P50

Whether in the toilet or in a pool, it from time to time happens that the Motorola P50 is dropped into the water. Even so, it’s not because a mobile phone has fallen into the water that it’s undoubtedly dead. Indeed, it is feasible to redo an Motorola P50 that has fallen into the water. To achieve this, it is needed to respect particular steps. People generally have bad reflexes and this is what can deteriorate the Motorola P50. We will first see the methods to be taken after the Motorola P50 has fallen into the water. We will see in the 2nd place the common mistakes that a large number of people make.water-damaged-Motorola-P50

Methods to follow in cases where your Motorola P50 fell into the water

If perhaps you need to restore your Motorola P50 in operating order, we suggest that you follow the steps below.

Do not attempt to turn the Motorola P50 back on after getting out the water

The very first thing to do when the Motorola P50 has fallen into the water is to turn off the mobile phone. Indeed, in cases where it did not turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Motorola P50 is switched on and wet, you may produce a short circuit and therefore toast the mobile phone.

Remove detachable components

When the Motorola P50 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Motorola P50

Utilizing a straw, you will need to suck up the water that is contained in your Motorola P50. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Motorola P50, you will have the ability to start drying it.

Dry the Motorola P50

The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the mobile phone to heat up or damage the mobile phone. When it is done, we recommend you to leave the Motorola P50 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Motorola P50.

Reassemble the components and turn on the Motorola P50

When you have completed the previous steps, your Motorola P50 should be dry. So now you can try to turn on the Motorola P50. If perhaps this does not do the job, we recommend you to wait a few days or to bring the Motorola P50 to a repairshop.

What should not be done in cases where the Motorola P50 has fallen into the water

You will find a number of stuff not to do when your Motorola P50 has fallen into the water. The first is to try to turn the mobile phone back on just after. This can destroy the Motorola P50. Next, it is strongly suggested not to use a heat source to dry the Motorola P50. Without a doubt, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally ruin the Motorola P50.