Whether in the toilet or in a swimming pool, it from time to time occurs that the Motorola One Vision is dropped in the water. On the other hand, it’s not because a mobile has fallen in the water that it is inevitably dead. Certainly, it is possible to redo an Motorola One Vision that has fallen in the water. To achieve this, it is essential to respect certain actions. People generally have bad reflexes and this is what can deteriorate the Motorola One Vision. We will first of all see the techniques to be taken after the Motorola One Vision has fallen into the water. We will see in the 2nd place the common mistakes that a large number of people make.
Steps to follow in the event that your Motorola One Vision fell into the water
If perhaps you wish to recover your Motorola One Vision in working order, we advise that you follow the steps listed below.
Do not try to turn the Motorola One Vision back on after exiting the water
The very first thing to accomplish when the Motorola One Vision has fallen into the water is to switch off the mobile. Certainly, in the event that it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Motorola One Vision is switched on and wet, you could make a short circuit and consequently toast the mobile.
Remove detachable components
Once the Motorola One Vision is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will probably be essential to take out the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your Motorola One Vision
Using a straw, you will have to suck up the water that is contained in your Motorola One Vision. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Motorola One Vision, you will have the ability to start drying it.
Dry the Motorola One Vision
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. Once it is done, we recommend you to leave the Motorola One Vision in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Motorola One Vision.
Reassemble the components and turn on the Motorola One Vision
When you have completed the previous steps, your Motorola One Vision should be dry. So now you can try to turn on the Motorola One Vision. In the event that this doesn’t work, we recommend you to hold out a couple of days or to bring the Motorola One Vision to a repairshop.
What should not be done in the event that the Motorola One Vision has fallen into the water
You will find a number of points not to accomplish when your Motorola One Vision has fallen into the water. The first of all is to try to turn the mobile back on just after. This can demolish the Motorola One Vision. Next, it is strongly advised not to use a heat source to dry the Motorola One Vision. Indeed, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. In fact, it could likewise damage the Motorola One Vision.
