How to fix a water damaged on Motorola One Macro

Whether in the wc or in a pool, it sometimes occurs that the Motorola One Macro is dropped into the water. Even so, it’s not simply because a cellphone has fallen into the water that it is obviously dead. Certainly, it is possible to redo an Motorola One Macro that has fallen into the water. To do this, it is necessary to respect specific actions. People often have bad reflexes and this is what can degrade the Motorola One Macro. We will 1st see the methods to be taken after the Motorola One Macro has fallen into the water. We will see in the secondary place the classical errors that many people make.water-damaged-Motorola-One-Macro

Methods to follow if perhaps your Motorola One Macro fell into the water

If you need to recover your Motorola One Macro in working order, we highly recommend that you follow the steps below.

Don’t try to turn the Motorola One Macro back on after exiting the water

One thing to accomplish when the Motorola One Macro has fallen into the water is to turn off the cellphone. Certainly, if perhaps it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Motorola One Macro is started and wet, you may make a short circuit and as a result toast the cellphone.

Remove detachable components

Once the Motorola One Macro is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be necessary to take away the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and continue to the next step.

Aspire the water that is in your Motorola One Macro

By using a straw, you will have to suck up the water that is contained in your Motorola One Macro. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola One Macro, you will be able to start drying it.

Dry the Motorola One Macro

The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Avoid using solutions that cause the cellphone to heat up or damage the cellphone. Once it is finished, we advise you to leave the Motorola One Macro in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Motorola One Macro.

Reassemble the components and turn on the Motorola One Macro

When you have completed the prior steps, your Motorola One Macro should be dry. So now you can make an attempt to turn on the Motorola One Macro. If perhaps this doesn’t perform, we advise you to hang on a couple of days or to bring the Motorola One Macro to a repairshop.

What should not be done if perhaps the Motorola One Macro has fallen into the water

You will find several things not to accomplish when ever your Motorola One Macro has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can demolish the Motorola One Macro. Next, it is strongly recommended not to use a heat source to dry the Motorola One Macro. Indeed, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the cellphone, do not shake it. In fact, it could also ruin the Motorola One Macro.