Whether in the wc or in a swimming pool, it sometimes occurs that the Motorola One Action is dropped in the water. On the other hand, it isn’t because a telephone has fallen in the water that it’s obviously dead. Certainly, it is possible to redo an Motorola One Action that has fallen in the water. To do this, it is essential to respect specific actions. People frequently have bad reflexes and this is what can damage the Motorola One Action. We will 1st see the steps to be taken after the Motorola One Action has fallen into the water. We will see in the 2nd place the classical mistakes that the majority of people make.
Steps to follow if your Motorola One Action fell into the water
Whenever you want to recover your Motorola One Action in working order, we suggest that you follow the steps below.
Don’t try to turn the Motorola One Action back on after exiting the water
The first thing to perform when the Motorola One Action has fallen into the water is to turn off the telephone. Certainly, if it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Motorola One Action is started and wet, you can make a short circuit and consequently toast the telephone.
Remove detachable components
Once the Motorola One Action is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Motorola One Action
Employing a straw, you have got to suck up the water that is contained in your Motorola One Action. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Motorola One Action, you will be ready to start drying it.
Dry the Motorola One Action
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the Motorola One Action in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Motorola One Action.
Reassemble the components and turn on the Motorola One Action
When you have completed the previous steps, your Motorola One Action should be dry. So now you can try to turn on the Motorola One Action. If this does not function, we recommend you to wait some days or to bring the Motorola One Action to a repairman.
What should not be done if the Motorola One Action has fallen into the water
You will find several points not to perform when ever your Motorola One Action has fallen into the water. The 1st is to try to turn the telephone back on just after. This can destroy the Motorola One Action. Next, it is highly suggested not to use a heat source to dry the Motorola One Action. Indeed, methods which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally damage the Motorola One Action.
