Whether in the wc or in a pool, it sometimes occurs that the Motorola One is dropped into the water. On the other hand, it isn’t simply because a mobile phone has fallen into the water that it’s obviously dead. Indeed, it is possible to redo an Motorola One that has fallen into the water. To accomplish this, it is needed to respect certain steps. People typically have bad reflexes and this is what can deteriorate the Motorola One. We will first discover the steps to be taken after the Motorola One has fallen into the water. We will discover in the secondary place the common errors that a good number of people make.
Steps to follow in cases where your Motorola One fell into the water
If you wish to restore your Motorola One in working order, we suggest that you follow the steps below.
Do not attempt to turn the Motorola One back on after getting out the water
The very first thing to accomplish when the Motorola One has fallen into the water is to shut off the mobile phone. Indeed, in cases where it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Motorola One is turned on and wet, you may produce a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Motorola One is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Motorola One
Employing a straw, you need to suck up the water that is contained in your Motorola One. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola One, you will have the capacity to start drying it.
Dry the Motorola One
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. Once it is completed, we recommend you to leave the Motorola One in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Motorola One.
Reassemble the components and turn on the Motorola One
When you have completed the prior steps, your Motorola One should be dry. So now you can try to turn on the Motorola One. In the event that this doesn’t work, we recommend you to hold out a few days or to bring the Motorola One to a repairshop.
What should not be done in cases where the Motorola One has fallen into the water
There are a number of points not to accomplish when ever your Motorola One has fallen into the water. The first is to try to turn the mobile phone back on just after. This can destroy the Motorola One. Following, it is highly advised not to use a heat source to dry the Motorola One. Certainly, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally ruin the Motorola One.
