Whether in the toilet or in a pool, it from time to time occurs that the Motorola Moto G7 is dropped in the water. However, it’s not simply because a mobile has fallen in the water that it’s obviously dead. In fact, it is possible to redo an Motorola Moto G7 that has fallen in the water. To achieve this, it is required to respect certain steps. People frequently have bad reflexes and this is what can degrade the Motorola Moto G7. We will 1st discover the methods to be taken after the Motorola Moto G7 has fallen into the water. We will discover in the 2nd place the classical errors that most people make.
Steps to follow if your Motorola Moto G7 fell into the water
If perhaps you need to recover your Motorola Moto G7 in working order, we highly recommend that you follow the steps below.
Do not try to turn the Motorola Moto G7 back on after getting out the water
The first thing to perform when the Motorola Moto G7 has fallen into the water is to shut off the mobile. In fact, if it did not switch off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Motorola Moto G7 is started and wet, you may produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Motorola Moto G7 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your Motorola Moto G7
Utilizing a straw, you will have to suck up the water that is contained in your Motorola Moto G7. For this, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Motorola Moto G7, you will have the ability to start drying it.
Dry the Motorola Moto G7
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. When it is performed, we suggest you to leave the Motorola Moto G7 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Motorola Moto G7.
Reassemble the components and turn on the Motorola Moto G7
When you have completed the prior steps, your Motorola Moto G7 should be dry. So now you can make an attempt to turn on the Motorola Moto G7. If this doesn’t function, we suggest you to wait some days or to bring the Motorola Moto G7 to a repairshop.
What should not be done if the Motorola Moto G7 has fallen into the water
You will find several stuff not to perform when ever your Motorola Moto G7 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can destroy the Motorola Moto G7. Next, it is strongly recommended not to use a heat source to dry the Motorola Moto G7. In fact, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. Indeed, it could additionally damage the Motorola Moto G7.
