Whether in the wc or in a pool, it sometimes happens that the Motorola Moto G42 is slipped in the water. Even so, it is not because a telephone has fallen in the water that it’s unavoidably dead. In fact, it is feasible to redo an Motorola Moto G42 that has fallen in the water. To get this done, it is essential to respect specific actions. People typically have bad reflexes and this is what can deteriorate the Motorola Moto G42. We will first of all discover the methods to be taken after the Motorola Moto G42 has fallen into the water. We will discover in the second place the classical errors that a good number of people make.
Steps to follow in cases where your Motorola Moto G42 fell into the water
If perhaps you need to recover your Motorola Moto G42 in working order, we advise that you follow the steps below.
Don’t try to turn the Motorola Moto G42 back on after exiting the water
The very first thing to accomplish when the Motorola Moto G42 has fallen into the water is to turn off the telephone. In fact, in cases where it didn’t switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Motorola Moto G42 is switched on and wet, you can produce a short circuit and therefore toast the telephone.
Remove detachable components
Once the Motorola Moto G42 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it’ll be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Motorola Moto G42
Employing a straw, you must suck up the water that is contained in your Motorola Moto G42. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Moto G42, you will have the capacity to start drying it.
Dry the Motorola Moto G42
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the Motorola Moto G42 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Motorola Moto G42.
Reassemble the components and turn on the Motorola Moto G42
When you have completed the prior steps, your Motorola Moto G42 should be dry. So now you can try to turn on the Motorola Moto G42. If perhaps this doesn’t work, we recommend you to hang on a few days or to bring the Motorola Moto G42 to a repairshop.
What should not be done in cases where the Motorola Moto G42 has fallen into the water
You will find a number of stuff not to accomplish when ever your Motorola Moto G42 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can demolish the Motorola Moto G42. Following, it is highly advised not to use a heat source to dry the Motorola Moto G42. Indeed, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. In fact, it could as well ruin the Motorola Moto G42.
