Whether in the wc or in a pool, it sometimes occurs that the Motorola Moto G Power is dropped into the water. Even so, it’s not because a mobile phone has fallen into the water that it’s undoubtedly dead. Certainly, it is feasible to redo an Motorola Moto G Power that has fallen into the water. To get this done, it is essential to respect specific steps. People often have bad reflexes and this is what can degrade the Motorola Moto G Power. We will 1st see the methods to be taken after the Motorola Moto G Power has fallen into the water. We will see in the second place the classical mistakes that many people make.
Steps to follow in cases where your Motorola Moto G Power fell into the water
In the event that you wish to recover your Motorola Moto G Power in operating order, we highly recommend that you follow the steps below.
Don’t try to turn the Motorola Moto G Power back on after getting out the water
One thing to accomplish when the Motorola Moto G Power has fallen into the water is to shut off the mobile phone. Certainly, in cases where it did not turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Motorola Moto G Power is switched on and wet, you may produce a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Motorola Moto G Power is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will probably be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these items to dry and continue to the next step.
Aspire the water that is in your Motorola Moto G Power
Using a straw, you must suck up the water that is contained in your Motorola Moto G Power. For this, you just have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Moto G Power, you will be able to start drying it.
Dry the Motorola Moto G Power
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using procédures that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we recommend you to leave the Motorola Moto G Power in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Motorola Moto G Power.
Reassemble the components and turn on the Motorola Moto G Power
When you have completed the previous steps, your Motorola Moto G Power should be dry. So now you can make an attempt to turn on the Motorola Moto G Power. If this doesn’t function, we recommend you to hang on a couple of days or to bring the Motorola Moto G Power to a repairshop.
What should not be done in cases where the Motorola Moto G Power has fallen into the water
You will find several things not to accomplish when your Motorola Moto G Power has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can demolish the Motorola Moto G Power. Following, it is strongly recommended not to use a heat source to dry the Motorola Moto G Power. Indeed, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could also ruin the Motorola Moto G Power.
