Whether in the toilet or in a pool, it occasionally happens that the Motorola G7 is dropped in the water. However, it is not because a cellphone has fallen in the water that it’s obviously dead. Certainly, it is possible to redo an Motorola G7 that has fallen in the water. To accomplish this, it is essential to respect certain steps. People often have bad reflexes and this is what can deteriorate the Motorola G7. We will first of all discover the steps to be taken after the Motorola G7 has fallen into the water. We will discover in the 2nd place the common errors that a good number of people make.
Steps to follow in the event that your Motorola G7 fell into the water
Whenever you need to recover your Motorola G7 in working order, we recommend that you follow the steps below.
Do not try to turn the Motorola G7 back on after getting out the water
One thing to do when the Motorola G7 has fallen into the water is to shut off the cellphone. Certainly, in the event that it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Motorola G7 is turned on and wet, you can produce a short circuit and consequently toast the cellphone.
Remove detachable components
Once the Motorola G7 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Motorola G7
Employing a straw, you will have to suck up the water that is contained in your Motorola G7. For this, you just have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Motorola G7, you will have the capacity to start drying it.
Dry the Motorola G7
The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. Once it is finished, we suggest you to leave the Motorola G7 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Motorola G7.
Reassemble the components and turn on the Motorola G7
When you have completed the previous steps, your Motorola G7 should be dry. So now you can try to turn on the Motorola G7. In the event that this does not perform, we suggest you to hang on a few days or to bring the Motorola G7 to a repairman.
What should not be done in the event that the Motorola G7 has fallen into the water
You will find a number of points not to do when ever your Motorola G7 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can kill the Motorola G7. Next, it is highly advised not to use a heat source to dry the Motorola G7. Certainly, techniques such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could as well ruin the Motorola G7.
