Whether in the toilet or in a swimming pool, it sometimes occurs that the Moto E6 Plus is dropped in the water. However, it isn’t because a mobile has fallen in the water that it is undoubtedly dead. Indeed, it is possible to redo an Moto E6 Plus that has fallen in the water. To achieve this, it is important to respect particular steps. People frequently have bad reflexes and this is what can deteriorate the Moto E6 Plus. We will first of all see the steps to be taken after the Moto E6 Plus has fallen into the water. We will see in the secondary place the classical errors that most people make.
Methods to follow if your Moto E6 Plus fell into the water
If perhaps you want to recover your Moto E6 Plus in working order, we recommend that you follow the steps listed below.
Don’t try to turn the Moto E6 Plus back on after getting out the water
The very first thing to do when the Moto E6 Plus has fallen into the water is to switch off the mobile. Indeed, if it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Moto E6 Plus is started and wet, you could create a short circuit and as a result toast the mobile.
Remove detachable components
Once the Moto E6 Plus is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be important to take out the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Moto E6 Plus
Using a straw, you need to suck up the water that is contained in your Moto E6 Plus. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Moto E6 Plus, you will be ready to start drying it.
Dry the Moto E6 Plus
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Prevent using solutions that cause the mobile to heat up or damage the mobile. Once it is done, we advise you to leave the Moto E6 Plus in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Moto E6 Plus.
Reassemble the components and turn on the Moto E6 Plus
When you have completed the previous steps, your Moto E6 Plus should be dry. So now you can make an attempt to turn on the Moto E6 Plus. If this doesn’t work, we advise you to hold out a couple of days or to bring the Moto E6 Plus to a repairshop.
What should not be done if the Moto E6 Plus has fallen into the water
There are several points not to do when ever your Moto E6 Plus has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can destroy the Moto E6 Plus. Next, it is highly suggested not to use a heat source to dry the Moto E6 Plus. Without a doubt, methods such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. In fact, it could additionally ruin the Moto E6 Plus.
