Whether in the toilet or in a swimming pool, it sometimes occurs that the Micromax iOne is dropped in the water. On the other hand, it isn’t simply because a phone has fallen in the water that it’s obviously dead. Certainly, it is possible to redo an Micromax iOne that has fallen in the water. To get this done, it is essential to respect particular steps. People often have bad reflexes and this is what can damage the Micromax iOne. We will first discover the methods to be taken after the Micromax iOne has fallen into the water. We will discover in the 2nd place the classical mistakes that many people make.
Steps to follow if your Micromax iOne fell into the water
In the event that you want to recover your Micromax iOne in working order, we recommend that you follow the steps below.
Do not try to turn the Micromax iOne back on after exiting the water
The first thing to perform when the Micromax iOne has fallen into the water is to shut off the phone. Certainly, if it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Micromax iOne is switched on and wet, you could create a short circuit and as a result toast the phone.
Remove detachable components
When the Micromax iOne is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these items to dry and continue to the next step.
Aspire the water that is in your Micromax iOne
Utilizing a straw, you will have to suck up the water that is contained in your Micromax iOne. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Micromax iOne, you will be ready to start drying it.
Dry the Micromax iOne
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using methods that cause the phone to heat up or damage the phone. When it is done, we advise you to leave the Micromax iOne in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Micromax iOne.
Reassemble the components and turn on the Micromax iOne
When you have completed the previous steps, your Micromax iOne should be dry. So now you can make an attempt to turn on the Micromax iOne. If perhaps this does not function, we advise you to hang on a few days or to bring the Micromax iOne to a repairshop.
What should not be done if the Micromax iOne has fallen into the water
You will find a number of points not to perform when your Micromax iOne has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can demolish the Micromax iOne. Next, it is strongly suggested not to use a heat source to dry the Micromax iOne. In fact, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Certainly, it could also ruin the Micromax iOne.
