How to fix a water damaged on Meizu 16s

Whether in the toilet or in a pool, it sometimes occurs that the Meizu 16s is slipped into the water. Even so, it’s not because a mobile has fallen into the water that it’s unavoidably dead. In truth, it is possible to redo an Meizu 16s that has fallen into the water. To get this done, it is required to respect specific steps. People often have bad reflexes and this is what can damage the Meizu 16s. We will first see the steps to be taken after the Meizu 16s has fallen into the water. We will see in the secondary place the common mistakes that many people make.water-damaged-Meizu-16s

Steps to follow in cases where your Meizu 16s fell into the water

Whenever you wish to restore your Meizu 16s in operating order, we highly recommend that you follow the steps listed below.

Do not attempt to turn the Meizu 16s back on after exiting the water

The first thing to do when the Meizu 16s has fallen into the water is to switch off the mobile. In truth, in cases where it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Meizu 16s is turned on and wet, you can create a short circuit and consequently toast the mobile.

Remove detachable components

When the Meizu 16s is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be required to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Meizu 16s

By using a straw, you will have to suck up the water that is contained in your Meizu 16s. For this, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Meizu 16s, you will have the capacity to start drying it.

Dry the Meizu 16s

The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the mobile to heat up or damage the mobile. When it is performed, we suggest you to leave the Meizu 16s in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Meizu 16s.

Reassemble the components and turn on the Meizu 16s

When you have completed the prior steps, your Meizu 16s should be dry. So now you can make an attempt to turn on the Meizu 16s. If perhaps this doesn’t work, we suggest you to hang on some days or to bring the Meizu 16s to a repairshop.

What should not be done in cases where the Meizu 16s has fallen into the water

There are a number of things not to do when your Meizu 16s has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can demolish the Meizu 16s. Following, it is strongly advised not to use a heat source to dry the Meizu 16s. Certainly, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could as well ruin the Meizu 16s.