Whether in the toilet or in a swimming pool, it sometimes occurs that the M HORSE Pure 3 is slipped into the water. However, it is not because a mobile has fallen into the water that it’s inevitably dead. Certainly, it is possible to redo an M HORSE Pure 3 that has fallen into the water. To achieve this, it is necessary to respect certain actions. People generally have bad reflexes and this is what can deteriorate the M HORSE Pure 3. We will first of all see the techniques to be taken after the M HORSE Pure 3 has fallen into the water. We will see in the 2nd place the common errors that the majority of people make.
Methods to follow in cases where your M HORSE Pure 3 fell into the water
If perhaps you desire to recover your M HORSE Pure 3 in working order, we recommend that you follow the steps listed below.
Do not try to turn the M HORSE Pure 3 back on after getting out the water
The first thing to do when the M HORSE Pure 3 has fallen into the water is to turn off the mobile. Certainly, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the M HORSE Pure 3 is started and wet, you may create a short circuit and therefore toast the mobile.
Remove detachable components
Once the M HORSE Pure 3 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will probably be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your M HORSE Pure 3
Using a straw, you need to suck up the water that is contained in your M HORSE Pure 3. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your M HORSE Pure 3, you will be able to start drying it.
Dry the M HORSE Pure 3
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using methods that cause the mobile to heat up or damage the mobile. Once it is finished, we recommend you to leave the M HORSE Pure 3 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the M HORSE Pure 3.
Reassemble the components and turn on the M HORSE Pure 3
When you have completed the previous steps, your M HORSE Pure 3 should be dry. So now you can make an attempt to turn on the M HORSE Pure 3. In the event that this doesn’t do the job, we recommend you to hang on some days or to bring the M HORSE Pure 3 to a repairshop.
What should not be done in cases where the M HORSE Pure 3 has fallen into the water
There are several things not to do when your M HORSE Pure 3 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can destroy the M HORSE Pure 3. Following, it is highly recommended not to use a heat source to dry the M HORSE Pure 3. Indeed, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. Indeed, it could also damage the M HORSE Pure 3.
