Whether in the toilet or in a pool, it from time to time occurs that the Logicom Moov is slipped in the water. On the other hand, it isn’t simply because a mobile phone has fallen in the water that it is inevitably dead. Certainly, it is possible to redo an Logicom Moov that has fallen in the water. To accomplish this, it is necessary to respect particular steps. People generally have bad reflexes and this is what can damage the Logicom Moov. We will 1st discover the steps to be taken after the Logicom Moov has fallen into the water. We will discover in the second place the classical mistakes that many people make.
Methods to follow if perhaps your Logicom Moov fell into the water
If you desire to recover your Logicom Moov in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Logicom Moov back on after getting out the water
One thing to do when the Logicom Moov has fallen into the water is to turn off the mobile phone. Certainly, if perhaps it did not switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Logicom Moov is started and wet, you can create a short circuit and as a result toast the mobile phone.
Remove detachable components
When the Logicom Moov is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be necessary to take away the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and continue to the next step.
Aspire the water that is in your Logicom Moov
Using a straw, you will have to suck up the water that is contained in your Logicom Moov. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Logicom Moov, you will be ready to start drying it.
Dry the Logicom Moov
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the mobile phone to heat up or damage the mobile phone. When it is done, we recommend you to leave the Logicom Moov in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Logicom Moov.
Reassemble the components and turn on the Logicom Moov
When you have completed the previous steps, your Logicom Moov should be dry. So now you can make an attempt to turn on the Logicom Moov. If this does not work, we recommend you to hang on a few days or to bring the Logicom Moov to a repairshop.
What should not be done if perhaps the Logicom Moov has fallen into the water
You will find several things not to do when your Logicom Moov has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can kill the Logicom Moov. Next, it is highly recommended not to use a heat source to dry the Logicom Moov. In fact, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile phone, do not shake it. Indeed, it could likewise damage the Logicom Moov.
