Whether in the wc or in a pool, it occasionally occurs that the Lenovo Z6 is slipped in the water. On the other hand, it is not simply because a mobile phone has fallen in the water that it is undoubtedly dead. Certainly, it is feasible to redo an Lenovo Z6 that has fallen in the water. To achieve this, it is important to respect certain actions. People typically have bad reflexes and this is what can damage the Lenovo Z6. We will first of all see the techniques to be taken after the Lenovo Z6 has fallen into the water. We will see in the second place the classical errors that the majority of people make.
Steps to follow in cases where your Lenovo Z6 fell into the water
If you wish to recover your Lenovo Z6 in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the Lenovo Z6 back on after exiting the water
One thing to do when the Lenovo Z6 has fallen into the water is to turn off the mobile phone. Certainly, in cases where it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Lenovo Z6 is turned on and wet, you may make a short circuit and as a result toast the mobile phone.
Remove detachable components
When the Lenovo Z6 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be important to take out the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Lenovo Z6
Utilizing a straw, you must suck up the water that is contained in your Lenovo Z6. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Lenovo Z6, you will be able to start drying it.
Dry the Lenovo Z6
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the mobile phone to heat up or damage the mobile phone. When it is done, we advise you to leave the Lenovo Z6 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Lenovo Z6.
Reassemble the components and turn on the Lenovo Z6
When you have completed the prior steps, your Lenovo Z6 should be dry. So now you can try to turn on the Lenovo Z6. If perhaps this does not function, we advise you to hang on some days or to bring the Lenovo Z6 to a repairshop.
What should not be done in cases where the Lenovo Z6 has fallen into the water
There are a number of stuff not to do when ever your Lenovo Z6 has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can kill the Lenovo Z6. Following, it is strongly suggested not to use a heat source to dry the Lenovo Z6. In fact, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could likewise damage the Lenovo Z6.
