Whether in the toilet or in a pool, it from time to time happens that the Lenovo Vibe P1m is slipped into the water. However, it isn’t because a phone has fallen into the water that it’s undoubtedly dead. In truth, it is feasible to redo an Lenovo Vibe P1m that has fallen into the water. To achieve this, it is required to respect specific actions. People often have bad reflexes and this is what can degrade the Lenovo Vibe P1m. We will 1st see the techniques to be taken after the Lenovo Vibe P1m has fallen into the water. We will see in the second place the common errors that most people make.
Methods to follow if your Lenovo Vibe P1m fell into the water
If you desire to recover your Lenovo Vibe P1m in working order, we suggest that you follow the steps below.
Don’t try to turn the Lenovo Vibe P1m back on after getting out the water
The very first thing to accomplish when the Lenovo Vibe P1m has fallen into the water is to turn off the phone. In truth, if it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Lenovo Vibe P1m is started and wet, you could produce a short circuit and consequently toast the phone.
Remove detachable components
When the Lenovo Vibe P1m is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be required to remove the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Lenovo Vibe P1m
Employing a straw, you will need to suck up the water that is contained in your Lenovo Vibe P1m. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Lenovo Vibe P1m, you will have the capacity to start drying it.
Dry the Lenovo Vibe P1m
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using procédures that cause the phone to heat up or damage the phone. When it is completed, we suggest you to leave the Lenovo Vibe P1m in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Lenovo Vibe P1m.
Reassemble the components and turn on the Lenovo Vibe P1m
When you have completed the previous steps, your Lenovo Vibe P1m should be dry. So now you can make an attempt to turn on the Lenovo Vibe P1m. In the event that this does not work, we suggest you to hold out a couple of days or to bring the Lenovo Vibe P1m to a repairshop.
What should not be done if the Lenovo Vibe P1m has fallen into the water
You will find several things not to accomplish when ever your Lenovo Vibe P1m has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can destroy the Lenovo Vibe P1m. Next, it is strongly advised not to use a heat source to dry the Lenovo Vibe P1m. In fact, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Certainly, it could also damage the Lenovo Vibe P1m.
