Whether in the wc or in a pool, it sometimes happens that the Lava Z93 is slipped in the water. Even so, it’s not simply because a phone has fallen in the water that it’s obviously dead. In truth, it is feasible to redo an Lava Z93 that has fallen in the water. To get this done, it is important to respect particular steps. People frequently have bad reflexes and this is what can deteriorate the Lava Z93. We will first of all see the techniques to be taken after the Lava Z93 has fallen into the water. We will see in the secondary place the common mistakes that a good number of people make.
Methods to follow in cases where your Lava Z93 fell into the water
Whenever you desire to recover your Lava Z93 in working order, we advise that you follow the steps listed below.
Don’t try to turn the Lava Z93 back on after exiting the water
One thing to accomplish when the Lava Z93 has fallen into the water is to switch off the phone. In truth, in cases where it did not switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Lava Z93 is started and wet, you may make a short circuit and therefore toast the phone.
Remove detachable components
Once the Lava Z93 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be important to remove the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Lava Z93
Employing a straw, you will need to suck up the water that is contained in your Lava Z93. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Lava Z93, you will have the ability to start drying it.
Dry the Lava Z93
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is finished, we suggest you to leave the Lava Z93 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Lava Z93.
Reassemble the components and turn on the Lava Z93
When you have completed the prior steps, your Lava Z93 should be dry. So now you can make an attempt to turn on the Lava Z93. If this does not perform, we suggest you to hold out some days or to bring the Lava Z93 to a repairshop.
What should not be done in cases where the Lava Z93 has fallen into the water
There are a number of stuff not to accomplish when ever your Lava Z93 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can kill the Lava Z93. Next, it is highly advised not to use a heat source to dry the Lava Z93. Without a doubt, techniques such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Indeed, it could also ruin the Lava Z93.
