Whether in the toilet or in a swimming pool, it occasionally occurs that the Jivi Xtreme 7 is slipped into the water. Nevertheless, it isn’t because a telephone has fallen into the water that it’s inevitably dead. Indeed, it is feasible to redo an Jivi Xtreme 7 that has fallen into the water. To get this done, it is required to respect particular actions. People typically have bad reflexes and this is what can degrade the Jivi Xtreme 7. We will 1st see the methods to be taken after the Jivi Xtreme 7 has fallen into the water. We will see in the 2nd place the classical mistakes that many people make.
Steps to follow in cases where your Jivi Xtreme 7 fell into the water
Whenever you need to restore your Jivi Xtreme 7 in operating order, we suggest that you follow the steps listed below.
Don’t attempt to turn the Jivi Xtreme 7 back on after exiting the water
The first thing to do when the Jivi Xtreme 7 has fallen into the water is to shut off the telephone. Indeed, in cases where it did not turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Jivi Xtreme 7 is switched on and wet, you can generate a short circuit and as a result toast the telephone.
Remove detachable components
When the Jivi Xtreme 7 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be required to take away the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Jivi Xtreme 7
Employing a straw, you will need to suck up the water that is contained in your Jivi Xtreme 7. For this, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Jivi Xtreme 7, you will be able to start drying it.
Dry the Jivi Xtreme 7
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is performed, we recommend you to leave the Jivi Xtreme 7 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Jivi Xtreme 7.
Reassemble the components and turn on the Jivi Xtreme 7
When you have completed the previous steps, your Jivi Xtreme 7 should be dry. So now you can make an attempt to turn on the Jivi Xtreme 7. If perhaps this does not work, we recommend you to wait a couple of days or to bring the Jivi Xtreme 7 to a repairman.
What should not be done in cases where the Jivi Xtreme 7 has fallen into the water
There are several points not to do when ever your Jivi Xtreme 7 has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can demolish the Jivi Xtreme 7. Following, it is highly advised not to use a heat source to dry the Jivi Xtreme 7. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could as well ruin the Jivi Xtreme 7.
