Whether in the toilet or in a swimming pool, it sometimes happens that the Jivi Xtreme 1 is slipped in the water. However, it isn’t because a phone has fallen in the water that it is inevitably dead. In truth, it is feasible to redo an Jivi Xtreme 1 that has fallen in the water. To accomplish this, it is required to respect particular steps. People frequently have bad reflexes and this is what can damage the Jivi Xtreme 1. We will first of all discover the techniques to be taken after the Jivi Xtreme 1 has fallen into the water. We will discover in the 2nd place the classical errors that many people make.
Methods to follow if perhaps your Jivi Xtreme 1 fell into the water
If you wish to recover your Jivi Xtreme 1 in working order, we recommend that you follow the steps below.
Don’t try to turn the Jivi Xtreme 1 back on after exiting the water
The first thing to perform when the Jivi Xtreme 1 has fallen into the water is to shut off the phone. In truth, if perhaps it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Jivi Xtreme 1 is started and wet, you might produce a short circuit and therefore toast the phone.
Remove detachable components
Once the Jivi Xtreme 1 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Jivi Xtreme 1
Employing a straw, you have got to suck up the water that is contained in your Jivi Xtreme 1. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Jivi Xtreme 1, you will be able to start drying it.
Dry the Jivi Xtreme 1
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the phone to heat up or damage the phone. Once it is done, we suggest you to leave the Jivi Xtreme 1 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Jivi Xtreme 1.
Reassemble the components and turn on the Jivi Xtreme 1
When you have completed the prior steps, your Jivi Xtreme 1 should be dry. So now you can make an attempt to turn on the Jivi Xtreme 1. If perhaps this doesn’t perform, we suggest you to hang on some days or to bring the Jivi Xtreme 1 to a repairman.
What should not be done if perhaps the Jivi Xtreme 1 has fallen into the water
You will find several things not to perform when your Jivi Xtreme 1 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can kill the Jivi Xtreme 1. Next, it is strongly advised not to use a heat source to dry the Jivi Xtreme 1. Indeed, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the phone, do not shake it. Indeed, it could additionally damage the Jivi Xtreme 1.
