Whether in the toilet or in a pool, it from time to time occurs that the Itel A46 is dropped in the water. Nonetheless, it’s not simply because a telephone has fallen in the water that it is inevitably dead. Indeed, it is possible to redo an Itel A46 that has fallen in the water. To achieve this, it is essential to respect particular actions. People generally have bad reflexes and this is what can degrade the Itel A46. We will first of all discover the steps to be taken after the Itel A46 has fallen into the water. We will discover in the 2nd place the classical mistakes that a large number of people make.
Methods to follow in cases where your Itel A46 fell into the water
If perhaps you wish to restore your Itel A46 in operating order, we advise that you follow the steps listed below.
Don’t try to turn the Itel A46 back on after exiting the water
The first thing to accomplish when the Itel A46 has fallen into the water is to switch off the telephone. Indeed, in cases where it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Itel A46 is started and wet, you might produce a short circuit and therefore toast the telephone.
Remove detachable components
When the Itel A46 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will probably be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Itel A46
By using a straw, you have got to suck up the water that is contained in your Itel A46. For this, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Itel A46, you will have the capacity to start drying it.
Dry the Itel A46
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. When it is finished, we suggest you to leave the Itel A46 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Itel A46.
Reassemble the components and turn on the Itel A46
When you have completed the prior steps, your Itel A46 should be dry. So now you can try to turn on the Itel A46. If perhaps this does not perform, we suggest you to hang on some days or to bring the Itel A46 to a repairman.
What should not be done in cases where the Itel A46 has fallen into the water
You will find a number of points not to accomplish when ever your Itel A46 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can destroy the Itel A46. Next, it is strongly suggested not to use a heat source to dry the Itel A46. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. In fact, it could as well damage the Itel A46.
