How to fix a water damaged on Itel A25

Whether in the toilet or in a swimming pool, it occasionally occurs that the Itel A25 is slipped into the water. On the other hand, it isn’t simply because a telephone has fallen into the water that it’s undoubtedly dead. Indeed, it is feasible to redo an Itel A25 that has fallen into the water. To do this, it is necessary to respect particular actions. People often have bad reflexes and this is what can damage the Itel A25. We will first discover the methods to be taken after the Itel A25 has fallen into the water. We will discover in the secondary place the classical errors that the majority of people make.water-damaged-Itel-A25

Steps to follow in cases where your Itel A25 fell into the water

In the event that you wish to recover your Itel A25 in working order, we recommend that you follow the steps below.

Don’t try to turn the Itel A25 back on after getting out the water

The very first thing to do when the Itel A25 has fallen into the water is to switch off the telephone. Indeed, in cases where it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Itel A25 is started and wet, you might produce a short circuit and therefore toast the telephone.

Remove detachable components

When the Itel A25 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be necessary to take out the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and proceed to the next step.

Aspire the water that is in your Itel A25

Using a straw, you will need to suck up the water that is contained in your Itel A25. For this, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Itel A25, you will be able to start drying it.

Dry the Itel A25

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. When it is performed, we advise you to leave the Itel A25 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Itel A25.

Reassemble the components and turn on the Itel A25

When you have completed the prior steps, your Itel A25 should be dry. So now you can make an attempt to turn on the Itel A25. If this does not function, we advise you to wait a couple of days or to bring the Itel A25 to a repairshop.

What should not be done in cases where the Itel A25 has fallen into the water

You will find a number of stuff not to do when ever your Itel A25 has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can kill the Itel A25. Following, it is strongly suggested not to use a heat source to dry the Itel A25. Without a doubt, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could likewise damage the Itel A25.