Whether in the toilet or in a swimming pool, it occasionally happens that the HUAWEI P40 is slipped into the water. On the other hand, it’s not because a mobile has fallen into the water that it’s inevitably dead. In truth, it is possible to redo an HUAWEI P40 that has fallen into the water. To accomplish this, it is needed to respect particular steps. People generally have bad reflexes and this is what can degrade the HUAWEI P40. We will 1st discover the steps to be taken after the HUAWEI P40 has fallen into the water. We will discover in the secondary place the common errors that many people make.
Steps to follow if perhaps your HUAWEI P40 fell into the water
Whenever you wish to recover your HUAWEI P40 in working order, we advise that you follow the steps listed below.
Do not try to turn the HUAWEI P40 back on after exiting the water
The first thing to perform when the HUAWEI P40 has fallen into the water is to shut off the mobile. In truth, if perhaps it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the HUAWEI P40 is turned on and wet, you may create a short circuit and as a result toast the mobile.
Remove detachable components
Once the HUAWEI P40 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your HUAWEI P40
Using a straw, you have got to suck up the water that is contained in your HUAWEI P40. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your HUAWEI P40, you will be able to start drying it.
Dry the HUAWEI P40
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the HUAWEI P40 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the HUAWEI P40.
Reassemble the components and turn on the HUAWEI P40
When you have completed the previous steps, your HUAWEI P40 should be dry. So now you can try to turn on the HUAWEI P40. If this doesn’t work, we suggest you to wait a few days or to bring the HUAWEI P40 to a repairshop.
What should not be done if perhaps the HUAWEI P40 has fallen into the water
There are a number of things not to perform when ever your HUAWEI P40 has fallen into the water. The 1st is to try to turn the mobile back on just after. This can demolish the HUAWEI P40. Following, it is strongly suggested not to use a heat source to dry the HUAWEI P40. Without a doubt, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. In fact, it could also ruin the HUAWEI P40.
