Whether in the wc or in a swimming pool, it from time to time happens that the HUAWEI P Smart S is dropped into the water. Even so, it is not because a telephone has fallen into the water that it is obviously dead. Certainly, it is feasible to redo an HUAWEI P Smart S that has fallen into the water. To accomplish this, it is required to respect particular steps. People generally have bad reflexes and this is what can degrade the HUAWEI P Smart S. We will 1st see the methods to be taken after the HUAWEI P Smart S has fallen into the water. We will see in the secondary place the common mistakes that a large number of people make.
Steps to follow in the event that your HUAWEI P Smart S fell into the water
If perhaps you want to recover your HUAWEI P Smart S in working order, we recommend that you follow the steps listed below.
Do not attempt to turn the HUAWEI P Smart S back on after getting out the water
One thing to accomplish when the HUAWEI P Smart S has fallen into the water is to switch off the telephone. Certainly, in the event that it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the HUAWEI P Smart S is switched on and wet, you might produce a short circuit and therefore toast the telephone.
Remove detachable components
When the HUAWEI P Smart S is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will probably be required to take away the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your HUAWEI P Smart S
By using a straw, you will need to suck up the water that is contained in your HUAWEI P Smart S. For doing it, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your HUAWEI P Smart S, you will be able to start drying it.
Dry the HUAWEI P Smart S
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. When it is finished, we suggest you to leave the HUAWEI P Smart S in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the HUAWEI P Smart S.
Reassemble the components and turn on the HUAWEI P Smart S
When you have completed the prior steps, your HUAWEI P Smart S should be dry. So now you can make an attempt to turn on the HUAWEI P Smart S. If this does not work, we suggest you to hang on a couple of days or to bring the HUAWEI P Smart S to a repairshop.
What should not be done in the event that the HUAWEI P Smart S has fallen into the water
There are several points not to accomplish when your HUAWEI P Smart S has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can kill the HUAWEI P Smart S. Following, it is highly recommended not to use a heat source to dry the HUAWEI P Smart S. Certainly, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could likewise damage the HUAWEI P Smart S.
