Whether in the wc or in a pool, it from time to time happens that the Huawei MediaPad M3 is dropped into the water. However, it’s not because a phone has fallen into the water that it is unavoidably dead. Indeed, it is possible to redo an Huawei MediaPad M3 that has fallen into the water. To achieve this, it is necessary to respect specific actions. People often have bad reflexes and this is what can degrade the Huawei MediaPad M3. We will 1st discover the techniques to be taken after the Huawei MediaPad M3 has fallen into the water. We will discover in the secondary place the common mistakes that the majority of people make.
Methods to follow in the event that your Huawei MediaPad M3 fell into the water
Whenever you want to recover your Huawei MediaPad M3 in operating order, we suggest that you follow the steps listed below.
Don’t attempt to turn the Huawei MediaPad M3 back on after exiting the water
The first thing to accomplish when the Huawei MediaPad M3 has fallen into the water is to switch off the phone. Indeed, in the event that it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Huawei MediaPad M3 is started and wet, you can create a short circuit and consequently toast the phone.
Remove detachable components
When the Huawei MediaPad M3 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be necessary to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Huawei MediaPad M3
By using a straw, you have got to suck up the water that is contained in your Huawei MediaPad M3. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Huawei MediaPad M3, you will have the ability to start drying it.
Dry the Huawei MediaPad M3
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using solutions that cause the phone to heat up or damage the phone. When it is finished, we suggest you to leave the Huawei MediaPad M3 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Huawei MediaPad M3.
Reassemble the components and turn on the Huawei MediaPad M3
When you have completed the prior steps, your Huawei MediaPad M3 should be dry. So now you can make an attempt to turn on the Huawei MediaPad M3. If perhaps this does not work, we suggest you to hang on a few days or to bring the Huawei MediaPad M3 to a repairman.
What should not be done in the event that the Huawei MediaPad M3 has fallen into the water
There are a number of things not to accomplish when your Huawei MediaPad M3 has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can kill the Huawei MediaPad M3. Next, it is highly advised not to use a heat source to dry the Huawei MediaPad M3. Indeed, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Certainly, it could also damage the Huawei MediaPad M3.
