Whether in the wc or in a pool, it occasionally happens that the Google Pixel 6 is dropped into the water. Nonetheless, it isn’t simply because a telephone has fallen into the water that it’s unavoidably dead. In fact, it is possible to redo an Google Pixel 6 that has fallen into the water. To get this done, it is needed to respect specific actions. People generally have bad reflexes and this is what can deteriorate the Google Pixel 6. We will first discover the methods to be taken after the Google Pixel 6 has fallen into the water. We will discover in the 2nd place the classical errors that a large number of people make.
Steps to follow if your Google Pixel 6 fell into the water
If you need to restore your Google Pixel 6 in operating order, we highly recommend that you follow the steps below.
Don’t try to turn the Google Pixel 6 back on after exiting the water
The first thing to perform when the Google Pixel 6 has fallen into the water is to turn off the telephone. In fact, if it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Google Pixel 6 is turned on and wet, you may make a short circuit and therefore toast the telephone.
Remove detachable components
When the Google Pixel 6 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will be needed to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Google Pixel 6
By using a straw, you will need to suck up the water that is contained in your Google Pixel 6. For this, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Google Pixel 6, you will be ready to start drying it.
Dry the Google Pixel 6
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the telephone to heat up or damage the telephone. When it is performed, we advise you to leave the Google Pixel 6 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Google Pixel 6.
Reassemble the components and turn on the Google Pixel 6
When you have completed the previous steps, your Google Pixel 6 should be dry. So now you can make an attempt to turn on the Google Pixel 6. In the event that this does not perform, we advise you to wait a few days or to bring the Google Pixel 6 to a repairshop.
What should not be done if the Google Pixel 6 has fallen into the water
There are a number of points not to perform when your Google Pixel 6 has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can demolish the Google Pixel 6. Following, it is highly suggested not to use a heat source to dry the Google Pixel 6. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could additionally damage the Google Pixel 6.
