Whether in the wc or in a pool, it sometimes happens that the Google Pixel 4 is slipped in the water. Nonetheless, it is not simply because a mobile has fallen in the water that it’s inevitably dead. Certainly, it is feasible to redo an Google Pixel 4 that has fallen in the water. To get this done, it is required to respect particular actions. People typically have bad reflexes and this is what can deteriorate the Google Pixel 4. We will first of all see the techniques to be taken after the Google Pixel 4 has fallen into the water. We will see in the second place the classical errors that a good number of people make.
Steps to follow if perhaps your Google Pixel 4 fell into the water
If you want to restore your Google Pixel 4 in operating order, we recommend that you follow the steps listed below.
Do not attempt to turn the Google Pixel 4 back on after getting out the water
One thing to perform when the Google Pixel 4 has fallen into the water is to switch off the mobile. Certainly, if perhaps it did not turn off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Google Pixel 4 is turned on and wet, you could generate a short circuit and consequently toast the mobile.
Remove detachable components
Once the Google Pixel 4 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be required to take away the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and continue to the next step.
Aspire the water that is in your Google Pixel 4
By using a straw, you need to suck up the water that is contained in your Google Pixel 4. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Google Pixel 4, you will have the ability to start drying it.
Dry the Google Pixel 4
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile to heat up or damage the mobile. Once it is completed, we suggest you to leave the Google Pixel 4 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Google Pixel 4.
Reassemble the components and turn on the Google Pixel 4
When you have completed the previous steps, your Google Pixel 4 should be dry. So now you can make an attempt to turn on the Google Pixel 4. If this doesn’t do the job, we suggest you to hold out a few days or to bring the Google Pixel 4 to a repairman.
What should not be done if perhaps the Google Pixel 4 has fallen into the water
There are a number of stuff not to perform when ever your Google Pixel 4 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can kill the Google Pixel 4. Following, it is highly suggested not to use a heat source to dry the Google Pixel 4. Certainly, techniques such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could as well damage the Google Pixel 4.
