Whether in the wc or in a swimming pool, it occasionally occurs that the Google Pixel 3a XL is dropped in the water. However, it’s not simply because a mobile has fallen in the water that it’s obviously dead. In fact, it is feasible to redo an Google Pixel 3a XL that has fallen in the water. To get this done, it is required to respect certain steps. People often have bad reflexes and this is what can degrade the Google Pixel 3a XL. We will first of all see the methods to be taken after the Google Pixel 3a XL has fallen into the water. We will see in the secondary place the common mistakes that many people make.
Methods to follow if perhaps your Google Pixel 3a XL fell into the water
Whenever you need to restore your Google Pixel 3a XL in operating order, we recommend that you follow the steps below.
Do not try to turn the Google Pixel 3a XL back on after getting out the water
One thing to accomplish when the Google Pixel 3a XL has fallen into the water is to turn off the mobile. In fact, if perhaps it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Google Pixel 3a XL is started and wet, you can produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Google Pixel 3a XL is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be required to take away the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and continue to the following step.
Aspire the water that is in your Google Pixel 3a XL
Employing a straw, you will need to suck up the water that is contained in your Google Pixel 3a XL. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Google Pixel 3a XL, you will have the capacity to start drying it.
Dry the Google Pixel 3a XL
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the mobile to heat up or damage the mobile. When it is performed, we recommend you to leave the Google Pixel 3a XL in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Google Pixel 3a XL.
Reassemble the components and turn on the Google Pixel 3a XL
When you have completed the prior steps, your Google Pixel 3a XL should be dry. So now you can make an attempt to turn on the Google Pixel 3a XL. If this doesn’t do the job, we recommend you to hold out some days or to bring the Google Pixel 3a XL to a repairshop.
What should not be done if perhaps the Google Pixel 3a XL has fallen into the water
There are a number of things not to accomplish when ever your Google Pixel 3a XL has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can demolish the Google Pixel 3a XL. Following, it is highly recommended not to use a heat source to dry the Google Pixel 3a XL. Certainly, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. Certainly, it could as well ruin the Google Pixel 3a XL.
