How to fix a water damaged on Energy Phone Pro Qi

Whether in the toilet or in a swimming pool, it from time to time occurs that the Energy Phone Pro Qi is dropped into the water. Even so, it is not because a mobile phone has fallen into the water that it’s undoubtedly dead. In fact, it is feasible to redo an Energy Phone Pro Qi that has fallen into the water. To do this, it is important to respect particular actions. People generally have bad reflexes and this is what can degrade the Energy Phone Pro Qi. We will 1st discover the steps to be taken after the Energy Phone Pro Qi has fallen into the water. We will discover in the 2nd place the common mistakes that the majority of people make.water-damaged-Energy-Phone-Pro-Qi

Steps to follow if perhaps your Energy Phone Pro Qi fell into the water

If you need to restore your Energy Phone Pro Qi in operating order, we recommend that you follow the steps below.

Do not try to turn the Energy Phone Pro Qi back on after getting out the water

One thing to do when the Energy Phone Pro Qi has fallen into the water is to switch off the mobile phone. In fact, if perhaps it did not turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Energy Phone Pro Qi is started and wet, you might generate a short circuit and as a result toast the mobile phone.

Remove detachable components

When the Energy Phone Pro Qi is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be important to remove the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these things to dry and continue to the next step.

Aspire the water that is in your Energy Phone Pro Qi

Employing a straw, you must suck up the water that is contained in your Energy Phone Pro Qi. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Energy Phone Pro Qi, you will have the capacity to start drying it.

Dry the Energy Phone Pro Qi

The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile phone to heat up or damage the mobile phone. When it is done, we recommend you to leave the Energy Phone Pro Qi in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Energy Phone Pro Qi.

Reassemble the components and turn on the Energy Phone Pro Qi

When you have completed the previous steps, your Energy Phone Pro Qi should be dry. So now you can make an attempt to turn on the Energy Phone Pro Qi. If perhaps this doesn’t do the job, we recommend you to hang on a few days or to bring the Energy Phone Pro Qi to a repairman.

What should not be done if perhaps the Energy Phone Pro Qi has fallen into the water

There are a number of points not to do when your Energy Phone Pro Qi has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can destroy the Energy Phone Pro Qi. Following, it is strongly recommended not to use a heat source to dry the Energy Phone Pro Qi. Certainly, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could as well ruin the Energy Phone Pro Qi.